grub2/0214-10_linux.in-Store-cmdline-in-BLS-snippets-instead-of.patch
Javier Martinez Canillas 4a742183a3
Store cmdline in BLS snippets instead of using a grubenv variable
The kernel cmdline was stored as a kernelopts variable in the grubenv file
and the BLS snippets used that. But this turned out to be fragile since the
grubenv file could be removed or get corrupted easily.

To prevent the entries to not have a cmdline if the grubenv can't be read,
a fallback variable was set in the GRUB config file. But this still caused
issues since the config needs to be re-generated to change the parameters.

Instead, let's store the cmdline in the BLS snippets. This will make the
configuration more robust, since it will work even without the grubenv
file and the BLS entries will contain all the information needed to boot.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
2020-05-13 20:03:20 +02:00

160 lines
5.7 KiB
Diff

From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Javier Martinez Canillas <javierm@redhat.com>
Date: Wed, 13 May 2020 19:40:10 +0200
Subject: [PATCH] 10_linux.in: Store cmdline in BLS snippets instead of using a
variable
The kernel cmdline was stored as a kernelopts variable in the grubenv file
and the BLS snippets used that. But this turned out to be fragile since the
grubenv file could be removed or get corrupted easily.
To prevent the entries to not have a cmdline if the grubenv can't be read,
a fallback variable was set in the GRUB config file. But this still caused
issues since the config needs to be re-generated to change the parameters.
Instead, let's store the cmdline in the BLS snippets. This will make the
configuration more robust, since it will work even without the grubenv
file and the BLS entries will contain all the information needed to boot.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
---
util/grub-switch-to-blscfg.in | 30 ++++++++++--------------------
util/grub.d/10_linux.in | 41 +++++++++++++++++++++++++++++++----------
2 files changed, 41 insertions(+), 30 deletions(-)
diff --git a/util/grub-switch-to-blscfg.in b/util/grub-switch-to-blscfg.in
index 3333a620c28..cb229126128 100644
--- a/util/grub-switch-to-blscfg.in
+++ b/util/grub-switch-to-blscfg.in
@@ -190,7 +190,7 @@ fi
mkbls() {
local kernelver=$1 && shift
local datetime=$1 && shift
- local bootprefix=$1 && shift
+ local kernelopts=$1 && shift
local debugname=""
local debugid=""
@@ -209,10 +209,9 @@ mkbls() {
cat <<EOF
title ${NAME} (${kernelver}) ${VERSION}${debugname}
version ${kernelver}${debugid}
-linux ${bootprefix}/vmlinuz-${kernelver}
-initrd ${bootprefix}/initramfs-${kernelver}.img
-options \$kernelopts
-id ${ID}-${datetime}-${kernelver}
+linux /vmlinuz-${kernelver}
+initrd /initramfs-${kernelver}.img
+options ${kernelopts}
grub_users \$grub_users
grub_arg --unrestricted
grub_class kernel${flavor}
@@ -236,28 +235,19 @@ copy_bls() {
linux_relpath="$("${grub_mkrelpath}" "${linux_path}")"
bootprefix="${linux_relpath%%"${linux}"}"
+ cmdline="root=${LINUX_ROOT_DEVICE} ro ${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
- if [ -f "${kernel_dir}/bls.conf" ] ; then
- cp -af "${kernel_dir}/bls.conf" "${bls_target}"
- if [ -n "${bootprefix}" ]; then
- sed -i -e "s,^\(linux[^ \t]*[ \t]\+\).*,\1${bootprefix}${linux},g" "${bls_target}"
- sed -i -e "/^initrd/ s,\([ \t]\+\)\([^ \t]\+\),\1${bootprefix}\2,g" "${bls_target}"
- fi
- else
- mkbls "${kernelver}" \
- "$(date -u +%Y%m%d%H%M%S -d "$(stat -c '%y' "${kernel_dir}")")" \
- "${bootprefix}" \
- >"${bls_target}"
- fi
+ mkbls "${kernelver}" \
+ "$(date -u +%Y%m%d%H%M%S -d "$(stat -c '%y' "${kernel_dir}")")" \
+ "${bootprefix}" "${cmdline}" >"${bls_target}"
if [ "x$GRUB_LINUX_MAKE_DEBUG" = "xtrue" ]; then
bls_debug="$(echo ${bls_target} | sed -e "s/${kernelver}/${kernelver}~debug/")"
cp -aT "${bls_target}" "${bls_debug}"
title="$(grep '^title[ \t]' "${bls_debug}" | sed -e 's/^title[ \t]*//')"
- blsid="$(grep '^id[ \t]' "${bls_debug}" | sed -e "s/\.${ARCH}/-debug.${arch}/")"
+ options="$(echo "${cmdline} ${GRUB_CMDLINE_LINUX_DEBUG}" | sed -e 's/\//\\\//g')"
sed -i -e "s/^title.*/title ${title}${GRUB_LINUX_DEBUG_TITLE_POSTFIX}/" "${bls_debug}"
- sed -i -e "s/^id.*/${blsid}/" "${bls_debug}"
- sed -i -e "s/^options.*/options \$kernelopts ${GRUB_CMDLINE_LINUX_DEBUG}/" "${bls_debug}"
+ sed -i -e "s/^options.*/options ${options}/" "${bls_debug}"
fi
done
diff --git a/util/grub.d/10_linux.in b/util/grub.d/10_linux.in
index 09adfce80fd..80299ecaf00 100644
--- a/util/grub.d/10_linux.in
+++ b/util/grub.d/10_linux.in
@@ -134,23 +134,43 @@ read_config()
done < ${config_file}
}
-populate_menu()
+blsdir="/boot/loader/entries"
+
+get_sorted_bls()
{
- blsdir="/boot/loader/entries"
- local -a files
local IFS=$'\n'
- gettext_printf "Generating boot entries from BLS files...\n" >&2
- files=($(for bls in ${blsdir}/*.conf ; do
- if ! [[ -e "${bls}" ]] ; then
- continue
- fi
+ files=($(for bls in ${blsdir}/*.conf; do
bls="${bls%.conf}"
bls="${bls##*/}"
echo "${bls}"
done | ${kernel_sort} | tac)) || :
- for bls in "${files[@]}" ; do
+ echo "${files[@]}"
+}
+
+update_bls_cmdline()
+{
+ local cmdline="root=${LINUX_ROOT_DEVICE} ro ${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
+ local -a files=($(get_sorted_bls))
+
+ for bls in "${files[@]}"; do
+ local options="${cmdline}"
+ if [ -z "${bls##*debug*}" ]; then
+ options="${options} ${GRUB_CMDLINE_LINUX_DEBUG}"
+ fi
+ options="$(echo "${options}" | sed -e 's/\//\\\//g')"
+ sed -i -e "s/^options.*/options ${options}/" "${blsdir}/${bls}.conf"
+ done
+}
+
+populate_menu()
+{
+ local -a files=($(get_sorted_bls))
+
+ gettext_printf "Generating boot entries from BLS files...\n" >&2
+
+ for bls in "${files[@]}"; do
read_config "${blsdir}/${bls}.conf"
menu="${menu}menuentry '${title}' ${grub_arg} --id=${bls} {\n"
@@ -224,6 +244,8 @@ if [ -z "\${kernelopts}" ]; then
fi
EOF
+ update_bls_cmdline
+
if [ "x${BLS_POPULATE_MENU}" = "xtrue" ]; then
populate_menu
else
@@ -244,7 +266,6 @@ EOF
fi
fi
- ${grub_editenv} - set kernelopts="root=${LINUX_ROOT_DEVICE} ro ${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
if [ -n "${GRUB_EARLY_INITRD_LINUX_CUSTOM}" ]; then
${grub_editenv} - set early_initrd="${GRUB_EARLY_INITRD_LINUX_CUSTOM}"
fi