%undefine _hardened_build %global tarversion 2.02 %undefine _missing_build_ids_terminate_build %global _configure_gnuconfig_hack 0 Name: grub2 Epoch: 1 Version: 2.02 Release: 102%{?dist} Summary: Bootloader with support for Linux, Multiboot and more License: GPLv3+ URL: http://www.gnu.org/software/grub/ Obsoletes: grub < 1:0.98 Source0: ftp://alpha.gnu.org/gnu/grub/grub-%{tarversion}.tar.xz #Source0: ftp://ftp.gnu.org/gnu/grub/grub-%%{tarversion}.tar.xz Source1: grub.macros Source2: grub.patches Source3: release-to-master.patch Source4: http://unifoundry.com/unifont-5.1.20080820.pcf.gz Source5: theme.tar.bz2 Source6: gitignore Source8: strtoull_test.c Source9: 20-grub.install Source13: 99-grub-mkconfig.install %include %{SOURCE1} # generate with do-rebase %include %{SOURCE2} BuildRequires: gcc efi-srpm-macros BuildRequires: flex bison binutils python3 BuildRequires: ncurses-devel xz-devel bzip2-devel BuildRequires: freetype-devel libusb-devel BuildRequires: fuse-devel BuildRequires: rpm-devel rpm-libs BuildRequires: autoconf automake autogen device-mapper-devel BuildRequires: freetype-devel gettext-devel git BuildRequires: texinfo BuildRequires: dejavu-sans-fonts BuildRequires: help2man # For %%_userunitdir macro BuildRequires: systemd %ifarch %{efi_arch} BuildRequires: pesign >= 0.99-8 %endif %if %{?_with_ccache: 1}%{?!_with_ccache: 0} BuildRequires: ccache %endif ExcludeArch: s390 s390x Obsoletes: %{name} <= %{evr} %if 0%{with_legacy_arch} Requires: %{name}-%{legacy_package_arch} = %{evr} %else Requires: %{name}-%{package_arch} = %{evr} %endif %global desc \ The GRand Unified Bootloader (GRUB) is a highly configurable and \ customizable bootloader with modular architecture. It supports a rich \ variety of kernel formats, file systems, computer architectures and \ hardware devices.\ %{nil} %description %{desc} %package common Summary: grub2 common layout BuildArch: noarch Conflicts: grubby < 8.40-18 %description common This package provides some directories which are required by various grub2 subpackages. %package tools Summary: Support tools for GRUB. Obsoletes: %{name}-tools < %{evr} Requires: %{name}-common = %{epoch}:%{version}-%{release} Requires: gettext os-prober which file Requires(pre): dracut Requires(post): dracut %description tools %{desc} This subpackage provides tools for support of all platforms. %ifarch x86_64 %package tools-efi Summary: Support tools for GRUB. Requires: gettext os-prober which file Requires: %{name}-common = %{epoch}:%{version}-%{release} Obsoletes: %{name}-tools < %{evr} %description tools-efi %{desc} This subpackage provides tools for support of EFI platforms. %endif %package tools-minimal Summary: Support tools for GRUB. Requires: gettext Requires: %{name}-common = %{epoch}:%{version}-%{release} Obsoletes: %{name}-tools < %{evr} %description tools-minimal %{desc} This subpackage provides tools for support of all platforms. %package tools-extra Summary: Support tools for GRUB. Requires: gettext os-prober which file Requires: %{name}-tools-minimal = %{epoch}:%{version}-%{release} Requires: %{name}-common = %{epoch}:%{version}-%{release} Obsoletes: %{name}-tools < %{evr} %description tools-extra %{desc} This subpackage provides tools for support of all platforms. %if 0%{with_efi_arch} %{expand:%define_efi_variant %%{package_arch} -o} %endif %if 0%{with_alt_efi_arch} %{expand:%define_efi_variant %%{alt_package_arch}} %endif %if 0%{with_legacy_arch} %{expand:%define_legacy_variant %%{legacy_package_arch}} %endif %if 0%{with_emu_arch} %package emu Summary: GRUB user-space emulation. Requires: %{name}-tools-minimal = %{epoch}:%{version}-%{release} %description emu %{desc} This subpackage provides the GRUB user-space emulation support of all platforms. %package emu-modules Summary: GRUB user-space emulation modules. Requires: %{name}-tools-minimal = %{epoch}:%{version}-%{release} %description emu-modules %{desc} This subpackage provides the GRUB user-space emulation modules. %endif %prep %do_common_setup %if 0%{with_efi_arch} mkdir grub-%{grubefiarch}-%{tarversion} grep -A100000 '# stuff "make" creates' .gitignore > grub-%{grubefiarch}-%{tarversion}/.gitignore cp %{SOURCE4} grub-%{grubefiarch}-%{tarversion}/unifont.pcf.gz git add grub-%{grubefiarch}-%{tarversion} %endif %if 0%{with_alt_efi_arch} mkdir grub-%{grubaltefiarch}-%{tarversion} grep -A100000 '# stuff "make" creates' .gitignore > grub-%{grubaltefiarch}-%{tarversion}/.gitignore cp %{SOURCE4} grub-%{grubaltefiarch}-%{tarversion}/unifont.pcf.gz git add grub-%{grubaltefiarch}-%{tarversion} %endif %if 0%{with_legacy_arch} mkdir grub-%{grublegacyarch}-%{tarversion} grep -A100000 '# stuff "make" creates' .gitignore > grub-%{grublegacyarch}-%{tarversion}/.gitignore cp %{SOURCE4} grub-%{grublegacyarch}-%{tarversion}/unifont.pcf.gz git add grub-%{grublegacyarch}-%{tarversion} %endif %if 0%{with_emu_arch} mkdir grub-emu-%{tarversion} grep -A100000 '# stuff "make" creates' .gitignore > grub-emu-%{tarversion}/.gitignore cp %{SOURCE4} grub-emu-%{tarversion}/unifont.pcf.gz git add grub-emu-%{tarversion} %endif git commit -m "After making subdirs" %build %if 0%{with_efi_arch} %{expand:%do_primary_efi_build %%{grubefiarch} %%{grubefiname} %%{grubeficdname} %%{_target_platform} %%{efi_target_cflags} %%{efi_host_cflags}} %endif %if 0%{with_alt_efi_arch} %{expand:%do_alt_efi_build %%{grubaltefiarch} %%{grubaltefiname} %%{grubalteficdname} %%{_alt_target_platform} %%{alt_efi_target_cflags} %%{alt_efi_host_cflags}} %endif %if 0%{with_legacy_arch} %{expand:%do_legacy_build %%{grublegacyarch}} %endif %if 0%{with_emu_arch} %{expand:%do_emu_build} %endif makeinfo --info --no-split -I docs -o docs/grub-dev.info \ docs/grub-dev.texi makeinfo --info --no-split -I docs -o docs/grub.info \ docs/grub.texi makeinfo --html --no-split -I docs -o docs/grub-dev.html \ docs/grub-dev.texi makeinfo --html --no-split -I docs -o docs/grub.html \ docs/grub.texi %install set -e rm -fr $RPM_BUILD_ROOT %do_common_install %if 0%{with_efi_arch} %{expand:%do_efi_install %%{grubefiarch} %%{grubefiname} %%{grubeficdname}} %endif %if 0%{with_alt_efi_arch} %{expand:%do_alt_efi_install %%{grubaltefiarch} %%{grubaltefiname} %%{grubalteficdname}} %endif %if 0%{with_legacy_arch} %{expand:%do_legacy_install %%{grublegacyarch} %%{alt_grub_target_name} 0%{with_efi_arch}} %endif %if 0%{with_emu_arch} %{expand:%do_emu_install %%{package_arch}} %endif rm -f $RPM_BUILD_ROOT%{_infodir}/dir ln -s %{name}-set-password ${RPM_BUILD_ROOT}/%{_sbindir}/%{name}-setpassword echo '.so man8/%{name}-set-password.8' > ${RPM_BUILD_ROOT}/%{_datadir}/man/man8/%{name}-setpassword.8 %ifnarch x86_64 rm -vf ${RPM_BUILD_ROOT}/%{_bindir}/%{name}-render-label rm -vf ${RPM_BUILD_ROOT}/%{_sbindir}/%{name}-bios-setup rm -vf ${RPM_BUILD_ROOT}/%{_sbindir}/%{name}-macbless %endif %find_lang grub # Make selinux happy with exec stack binaries. mkdir ${RPM_BUILD_ROOT}%{_sysconfdir}/prelink.conf.d/ cat << EOF > ${RPM_BUILD_ROOT}%{_sysconfdir}/prelink.conf.d/grub2.conf # these have execstack, and break under selinux -b /usr/bin/grub2-script-check -b /usr/bin/grub2-mkrelpath -b /usr/bin/grub2-mount -b /usr/bin/grub2-fstest -b /usr/sbin/grub2-bios-setup -b /usr/sbin/grub2-probe -b /usr/sbin/grub2-sparc64-setup EOF # Install kernel-install scripts install -d -m 0755 %{buildroot}%{_prefix}/lib/kernel/install.d/ install -D -m 0755 -t %{buildroot}%{_prefix}/lib/kernel/install.d/ %{SOURCE9} install -D -m 0755 -t %{buildroot}%{_prefix}/lib/kernel/install.d/ %{SOURCE13} install -d -m 0755 %{buildroot}%{_sysconfdir}/kernel/install.d/ # Install systemd user service to set the boot_success flag install -D -m 0755 -t %{buildroot}%{_userunitdir} \ docs/grub-boot-success.{timer,service} install -d -m 0755 %{buildroot}%{_userunitdir}/timers.target.wants ln -s ../grub-boot-success.timer \ %{buildroot}%{_userunitdir}/timers.target.wants # Install systemd system-update unit to set boot_indeterminate for offline-upd install -D -m 0755 -t %{buildroot}%{_unitdir} docs/grub-boot-indeterminate.service install -d -m 0755 %{buildroot}%{_unitdir}/system-update.target.wants ln -s ../grub-boot-indeterminate.service \ %{buildroot}%{_unitdir}/system-update.target.wants # Don't run debuginfo on all the grub modules and whatnot; it just # rejects them, complains, and slows down extraction. %global finddebugroot "%{_builddir}/%{?buildsubdir}/debug" %global dip RPM_BUILD_ROOT=%{finddebugroot} %{__debug_install_post} %define __debug_install_post ( \ mkdir -p %{finddebugroot}/usr \ mv ${RPM_BUILD_ROOT}/usr/bin %{finddebugroot}/usr/bin \ mv ${RPM_BUILD_ROOT}/usr/sbin %{finddebugroot}/usr/sbin \ %{dip} \ install -m 0755 -d %{buildroot}/usr/lib/ %{buildroot}/usr/src/ \ cp -al %{finddebugroot}/usr/lib/debug/ \\\ %{buildroot}/usr/lib/debug/ \ cp -al %{finddebugroot}/usr/src/debug/ \\\ %{buildroot}/usr/src/debug/ ) \ mv %{finddebugroot}/usr/bin %{buildroot}/usr/bin \ mv %{finddebugroot}/usr/sbin %{buildroot}/usr/sbin \ %{nil} %undefine buildsubdir %pre tools if [ -f /boot/grub2/user.cfg ]; then if grep -q '^GRUB_PASSWORD=' /boot/grub2/user.cfg ; then sed -i 's/^GRUB_PASSWORD=/GRUB2_PASSWORD=/' /boot/grub2/user.cfg fi elif [ -f %{efi_esp_dir}/user.cfg ]; then if grep -q '^GRUB_PASSWORD=' %{efi_esp_dir}/user.cfg ; then sed -i 's/^GRUB_PASSWORD=/GRUB2_PASSWORD=/' \ %{efi_esp_dir}/user.cfg fi elif [ -f /etc/grub.d/01_users ] && \ grep -q '^password_pbkdf2 root' /etc/grub.d/01_users ; then if [ -f %{efi_esp_dir}/grub.cfg ]; then # on EFI we don't get permissions on the file, but # the directory is protected. grep '^password_pbkdf2 root' /etc/grub.d/01_users | \ sed 's/^password_pbkdf2 root \(.*\)$/GRUB2_PASSWORD=\1/' \ > %{efi_esp_dir}/user.cfg fi if [ -f /boot/grub2/grub.cfg ]; then install -m 0600 /dev/null /boot/grub2/user.cfg chmod 0600 /boot/grub2/user.cfg grep '^password_pbkdf2 root' /etc/grub.d/01_users | \ sed 's/^password_pbkdf2 root \(.*\)$/GRUB2_PASSWORD=\1/' \ > /boot/grub2/user.cfg fi fi %posttrans tools if [ -f /etc/default/grub ]; then ! grep -q '^GRUB_ENABLE_BLSCFG=.*' /etc/default/grub && \ /sbin/grub2-switch-to-blscfg --backup-suffix=.rpmsave &>/dev/null || : fi %triggerun -- grub2 < 1:1.99-4 # grub2 < 1.99-4 removed a number of essential files in postun. To fix upgrades # from the affected grub2 packages, we first back up the files in triggerun and # later restore them in triggerpostun. # https://bugzilla.redhat.com/show_bug.cgi?id=735259 # Back up the files before uninstalling old grub2 mkdir -p /boot/grub2.tmp && mv -f /boot/grub2/*.mod \ /boot/grub2/*.img \ /boot/grub2/*.lst \ /boot/grub2/device.map \ /boot/grub2.tmp/ || : %triggerpostun -- grub2 < 1:1.99-4 # ... and restore the files. test ! -f /boot/grub2/device.map && test -d /boot/grub2.tmp && mv -f /boot/grub2.tmp/*.mod \ /boot/grub2.tmp/*.img \ /boot/grub2.tmp/*.lst \ /boot/grub2.tmp/device.map \ /boot/grub2/ && rm -r /boot/grub2.tmp/ || : %files common -f grub.lang %dir %{_libdir}/grub/ %dir %{_datarootdir}/grub/ %dir %{_datarootdir}/grub/themes/ %exclude %{_datarootdir}/grub/themes/* %attr(0700,root,root) %dir %{_sysconfdir}/grub.d %{_prefix}/lib/kernel/install.d/20-grub.install %{_prefix}/lib/kernel/install.d/99-grub-mkconfig.install %dir %{_datarootdir}/grub %exclude %{_datarootdir}/grub/* %dir /boot/%{name} %dir /boot/%{name}/themes/ %dir /boot/%{name}/themes/system %exclude /boot/%{name}/themes/system/* %attr(0700,root,root) %dir /boot/grub2 %exclude /boot/grub2/* %dir %attr(0700,root,root) %{efi_esp_dir} %exclude %{efi_esp_dir}/* %license COPYING %ghost %config(noreplace) /boot/grub2/grubenv %doc INSTALL %doc NEWS %doc README %doc THANKS %doc TODO %doc docs/grub.html %doc docs/grub-dev.html %doc docs/font_char_metrics.png %files tools-minimal %{_sysconfdir}/prelink.conf.d/grub2.conf %{_sbindir}/%{name}-get-kernel-settings %{_sbindir}/%{name}-probe %attr(4755, root, root) %{_sbindir}/%{name}-set-bootflag %{_sbindir}/%{name}-set-default %{_sbindir}/%{name}-set*password %{_bindir}/%{name}-editenv %{_bindir}/%{name}-mkpasswd-pbkdf2 %{_bindir}/%{name}-mount %{_datadir}/man/man3/%{name}-get-kernel-settings* %{_datadir}/man/man8/%{name}-set-default* %{_datadir}/man/man8/%{name}-set*password* %{_datadir}/man/man1/%{name}-editenv* %{_datadir}/man/man1/%{name}-mkpasswd-* %ifarch x86_64 %files tools-efi %{_sbindir}/%{name}-macbless %{_bindir}/%{name}-render-label %{_datadir}/man/man8/%{name}-macbless* %{_datadir}/man/man1/%{name}-render-label* %endif %files tools %attr(0644,root,root) %ghost %config(noreplace) %{_sysconfdir}/default/grub %config %{_sysconfdir}/grub.d/??_* %ifarch ppc64 ppc64le %exclude %{_sysconfdir}/grub.d/10_linux %else %exclude %{_sysconfdir}/grub.d/10_linux_bls %endif %{_sysconfdir}/grub.d/README %{_userunitdir}/grub-boot-success.timer %{_userunitdir}/grub-boot-success.service %{_userunitdir}/timers.target.wants %{_unitdir}/grub-boot-indeterminate.service %{_unitdir}/system-update.target.wants %{_infodir}/%{name}* %{_datarootdir}/grub/* %{_sbindir}/%{name}-install %exclude %{_datarootdir}/grub/themes %exclude %{_datarootdir}/grub/*.h %{_datarootdir}/bash-completion/completions/grub %{_sbindir}/%{name}-mkconfig %{_sbindir}/%{name}-switch-to-blscfg %{_sbindir}/%{name}-rpm-sort %{_sbindir}/%{name}-reboot %{_bindir}/%{name}-file %{_bindir}/%{name}-menulst2cfg %{_bindir}/%{name}-mkimage %{_bindir}/%{name}-mkrelpath %{_bindir}/%{name}-script-check %{_datadir}/man/man?/* # exclude man pages from tools-extra %exclude %{_datadir}/man/man8/%{name}-sparc64-setup* %exclude %{_datadir}/man/man8/%{name}-install* %exclude %{_datadir}/man/man1/%{name}-fstest* %exclude %{_datadir}/man/man1/%{name}-glue-efi* %exclude %{_datadir}/man/man1/%{name}-kbdcomp* %exclude %{_datadir}/man/man1/%{name}-mkfont* %exclude %{_datadir}/man/man1/%{name}-mklayout* %exclude %{_datadir}/man/man1/%{name}-mknetdir* %exclude %{_datadir}/man/man1/%{name}-mkrescue* %exclude %{_datadir}/man/man1/%{name}-mkstandalone* %exclude %{_datadir}/man/man1/%{name}-syslinux2cfg* # exclude man pages from tools-minimal %exclude %{_datadir}/man/man3/%{name}-get-kernel-settings* %exclude %{_datadir}/man/man8/%{name}-set-default* %exclude %{_datadir}/man/man8/%{name}-set*password* %exclude %{_datadir}/man/man1/%{name}-editenv* %exclude %{_datadir}/man/man1/%{name}-mkpasswd-* %exclude %{_datadir}/man/man8/%{name}-macbless* %exclude %{_datadir}/man/man1/%{name}-render-label* %if %{with_legacy_arch} %{_sbindir}/%{name}-install %ifarch x86_64 %{_sbindir}/%{name}-bios-setup %else %exclude %{_sbindir}/%{name}-bios-setup %exclude %{_datadir}/man/man8/%{name}-bios-setup* %endif %ifarch %{sparc} %{_sbindir}/%{name}-sparc64-setup %else %exclude %{_sbindir}/%{name}-sparc64-setup %exclude %{_datadir}/man/man8/%{name}-sparc64-setup* %endif %ifarch %{sparc} ppc ppc64 ppc64le %{_sbindir}/%{name}-ofpathname %else %exclude %{_sbindir}/%{name}-ofpathname %exclude %{_datadir}/man/man8/%{name}-ofpathname* %endif %endif %files tools-extra %{_sbindir}/%{name}-sparc64-setup %{_sbindir}/%{name}-ofpathname %{_bindir}/%{name}-fstest %{_bindir}/%{name}-glue-efi %{_bindir}/%{name}-kbdcomp %{_bindir}/%{name}-mkfont %{_bindir}/%{name}-mklayout %{_bindir}/%{name}-mknetdir %ifnarch %{sparc} %{_bindir}/%{name}-mkrescue %endif %{_bindir}/%{name}-mkstandalone %{_bindir}/%{name}-syslinux2cfg %{_sysconfdir}/sysconfig/grub %{_datadir}/man/man8/%{name}-sparc64-setup* %{_datadir}/man/man8/%{name}-install* %{_datadir}/man/man1/%{name}-fstest* %{_datadir}/man/man1/%{name}-glue-efi* %{_datadir}/man/man1/%{name}-kbdcomp* %{_datadir}/man/man1/%{name}-mkfont* %{_datadir}/man/man1/%{name}-mklayout* %{_datadir}/man/man1/%{name}-mknetdir* %{_datadir}/man/man1/%{name}-mkrescue* %{_datadir}/man/man1/%{name}-mkstandalone* %{_datadir}/man/man8/%{name}-ofpathname* %{_datadir}/man/man1/%{name}-syslinux2cfg* %exclude %{_datarootdir}/grub/themes/starfield %if 0%{with_efi_arch} %{expand:%define_efi_variant_files %%{package_arch} %%{grubefiname} %%{grubeficdname} %%{grubefiarch} %%{target_cpu_name} %%{grub_target_name}} %endif %if 0%{with_alt_efi_arch} %{expand:%define_efi_variant_files %%{alt_package_arch} %%{grubaltefiname} %%{grubalteficdname} %%{grubaltefiarch} %%{alt_target_cpu_name} %%{alt_grub_target_name}} %endif %if 0%{with_legacy_arch} %{expand:%define_legacy_variant_files %%{legacy_package_arch} %%{grublegacyarch}} %endif %if 0%{with_emu_arch} %files emu %{_bindir}/%{name}-emu* %{_datadir}/man/man1/%{name}-emu* %files emu-modules %{_libdir}/grub/%{emuarch}-emu/* %exclude %{_libdir}/grub/%{emuarch}-emu/*.module %endif %changelog * Tue Nov 26 2019 Javier Martinez Canillas - 2.02-102 - grub-set-bootflag: Write new env to tmpfile and then rename (hdegoede) Resolves: CVE-2019-14865 Resolves: rhbz#1776580 * Wed Oct 16 2019 Javier Martinez Canillas - 2.02-101 - 99-grub-mkconfig: Also disable BLS usage for Xen Dom0 hosts Resolves: rhbz#1761799 - blscfg: Fix typo for gfxpayload variable name Resolves: rhbz#1706489 * Thu Oct 10 2019 Javier Martinez Canillas - 2.02-100 - 99-grub-mkconfig: Fix script condition to exit and remove ppc64 BE check Related: rhbz#1703700 * Wed Oct 09 2019 Javier Martinez Canillas - 2.02-99 - 99-grub-mkconfig: Disable BLS usage for Xen DomU guests Resolves: rhbz#1703700 * Fri Oct 04 2019 Javier Martinez Canillas - 2.02-98 - Don't add a class option to menu entries generated for ppc64le Resolves: rhbz#1758225 * Wed Aug 07 2019 Javier Martinez Canillas - 2.02-97 - Include regexp module in EFI builds * Thu Aug 01 2019 Javier Martinez Canillas - 2.02-96 - Manual build for the Fedora 31 mass rebuild to succeed * Thu Jul 25 2019 Fedora Release Engineering - Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild * Thu Jul 18 2019 Javier Martinez Canillas - 2.02-94 - 20-grub-install: Restore default SELinux security contexts for BLS files Resolves: rhbz#1726020 * Wed Jul 17 2019 Javier Martinez Canillas - 2.02-93 - Add btrfs snapshot submenu when BLS configuration is used - Move grub2-probe to the grub2-tools-minimal subpackage Resolves: rhbz#1715994 * Tue Jul 16 2019 Javier Martinez Canillas - 2.02-92 - Cleanup our patchset to reduce the number of patches * Sat Jul 13 2019 Javier Martinez Canillas - 2.02-91 - Includes security modules in Grub2 EFI builds (benjamin.doron) Resolves: rhbz#1722938 - Enable again multiboot and multiboot2 modules on EFI builds Resolves: rhbz#1703872 * Fri Jul 05 2019 Javier Martinez Canillas - 2.02-90 - Fix failure to request grub.cfg over HTTP - Some ARM fixes (pbrobinson) - Preserve multi-device workflows (Yclept Nemo) * Thu Jun 27 2019 Javier Martinez Canillas - 2.02-89 - Fix --bls-directory option comment in grub2-switch-to-blscfg man page Resolves: rhbz#1714835 - 10_linux_bls: use '=' to separate --id argument due a Petitboot bug - grub-set-bootflag: Print an error if failing to read from grubenv Resolves: rhbz#1702354 - 10_linux: generate BLS section even if no kernels are found in /boot - 10_linux: don't search for OSTree kernels * Tue Jun 18 2019 Sergio Durigan Junior - 2.02-88 - Use '-g' instead of '-g3' when compiling grub2. Resolves: rhbz#1708780 * Tue Jun 11 2019 Javier Martinez Canillas - 2.02-87 - Rebuild for RPM 4.15 * Mon Jun 10 22:13:19 CET 2019 Igor Gnatenko - Rebuild for RPM 4.15 * Mon Jun 10 15:42:01 CET 2019 Igor Gnatenko - Rebuild for RPM 4.15 * Mon May 20 2019 Javier Martinez Canillas - 2.02-84 - Don't try to switch to a BLS config if GRUB_ENABLE_BLSCFG is already set * Wed May 15 2019 Javier Martinez Canillas - 2.02-83 - Fix error messages wrongly being printed when executing blscfg command Resolves: rhbz#1699761 - Remove bogus load_env after blscfg command in 10_linux * Tue May 07 2019 Javier Martinez Canillas - 2.02-82 - Make blscfg module compatible at least up to the Fedora 19 GRUB core Related: rhbz#1652806 * Fri May 03 2019 Neal Gompa - 2.02-81 - Add grub2-mount to grub2-tools-minimal subpackage Resolves: rhbz#1471267 * Fri May 03 2019 Javier Martinez Canillas - 2.02-80 - Add grub2-emu subpackage * Fri May 03 2019 Tim Landscheidt - 2.02-79 - Fix description of grub2-pc Resolves: rhbz#1484298 * Thu Apr 18 2019 Javier Martinez Canillas - 2.02-78 - Add 10_reset_boot_success to Makefile Related: rhbz#17010 * Thu Apr 18 2019 Javier Martinez Canillas - 2.02-77 - Never remove boot loader configuration for other boot loaders from the ESP. This would render machines with sd-boot unbootable (zbyszek) - Execute grub2-switch-to-blscfg script in %%posttrans instead of %%post - grub.d: Split out boot success reset from menu auto hide script (lorbus) - HTTP boot: strncmp returns 0 on equal (stephen) - Some grub2-emu fixes and make it to not print unnecessary messages - Don't assume that boot commands will only return on fail * Thu Mar 28 2019 Javier Martinez Canillas - 2.02-76 - 10_linux_bls: don't add --users option to generated menu entries Resolves: rhbz#1693515 * Tue Mar 26 2019 Javier Martinez Canillas - 2.02-75 - A set of EFI fixes to support arm64 QCom UEFI firmwares (pbrobinson) * Fri Mar 22 2019 Javier Martinez Canillas - 2.02-74 - Fix some BLS snippets not being displayed in the GRUB menu Resolves: rhbz#1691232 - Fix possible undefined behaviour due wrong grub_efi_status_t type (pjones) * Wed Mar 20 2019 Javier Martinez Canillas - 2.02-73 - Only set blsdir if /boot/loader/entries is in a btrfs or zfs partition Related: rhbz#1688453 * Mon Mar 11 2019 Javier Martinez Canillas - 2.02-72 - Avoid grub2-efi package to overwrite existing /boot/grub2/grubenv file Resolves: rhbz#1687323 - Switch to BLS in tools package %%post scriptlet Resolves: rhbz#1652806 * Wed Feb 27 2019 Javier Martinez Canillas - 2.02-71 - 20-grub-install: Replace, rather than overwrite, the existing kernel (pjones) Resolves: rhbz#1642402 - 99-grub-mkconfig: Don't update grubenv generating entries on ppc64le Related: rhbz#1637875 - blscfg: fallback to default_kernelopts if BLS option field isn't set Related: rhbz#1625124 - grub-switch-to-blscfg: copy increment.mod for legacy BIOS and ppc64 Resolves: rhbz#1652806 * Fri Feb 15 2019 Javier Martinez Canillas - 2.02-70 - Check if blsdir exists before attempting to get it's real path Resolves: rhbz#1677415 * Wed Feb 13 2019 Javier Martinez Canillas - 2.02-69 - Don't make grub_strtoull() print an error if no conversion is performed Resolves: rhbz#1674512 - Set blsdir if the BLS directory path isn't one of the looked up by default Resolves: rhbz#1657240 * Mon Feb 04 2019 Javier Martinez Canillas - 2.02-68 - Don't build the grub2-efi-ia32-* packages on i686 (pjones) - Add efi-export-env and efi-load-env commands (pjones) - Make it possible to subtract conditions from debug= (pjones) - Try to set -fPIE and friends on libgnu.a (pjones) - Add more options to blscfg command to make it more flexible - Add support for prepend early initrds to the BLS entries - Fix grub.cfg-XXX look up when booting over TFTP * Fri Feb 01 2019 Fedora Release Engineering - Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild * Mon Dec 17 2018 Javier Martinez Canillas - 2.02-66 - Don't exclude /etc/grub.d/01_fallback_counting anymore * Tue Dec 11 2018 Javier Martinez Canillas - 2.02-65 - BLS files should only be copied by grub-switch-to-blscfg if BLS isn't set Related: rhbz#1638117 - Fix get_entry_number() wrongly dereferencing the tail pointer Resolves: rhbz#1654936 - Make grub2-mkconfig to honour GRUB_CMDLINE_LINUX in /etc/default/grub Resolves: rhbz#1637875 * Fri Nov 30 2018 Javier Martinez Canillas - 2.02-64 - Add comments and revert logic changes in 01_fallback_counting - Remove quotes when reading ID value from /etc/os-release Related: rhbz#1650706 - blscfg: expand grub_users before passing to grub_normal_add_menu_entry() Resolves: rhbz#1650706 - Drop buggy downstream patch "efinet: retransmit if our device is busy" Resolves: rhbz#1649048 - Make the menu entry users option argument to be optional Related: rhbz#1652434 - 10_linux_bls: add missing menu entries options Resolves: rhbz#1652434 - Drop "Be more aggro about actually using the *configured* network device." Resolves: rhbz#1654388 - Fix menu entry selection based on title Resolves: rhbz#1654936 * Wed Nov 21 2018 Javier Martinez Canillas - 2.02-63 - add 10_linux_bls grub.d snippet to generate menu entries from BLS files Resolves: rhbz#1636013 - Only set kernelopts in grubenv if it wasn't set before Resolves: rhbz#1636466 - kernel-install: Remove existing initramfs if it's older than the kernel (pjones) Resolves: rhbz#1638405 - Update the saved entry correctly after a kernel install (pjones) Resolves: rhbz#1638117 - blscfg: sort everything with rpm *package* comparison (pjones) Related: rhbz#1638103 - blscfg: Make 10_linux_bls sort the same way as well Related: rhbz#1638103 - don't set saved_entry on grub2-mkconfig Resolves: rhbz#1636466 - Fix menu entry selection based on ID and title (pjones) Resolves: rhbz#1640979 - Don't unconditionally set default entry when installing debug kernels Resolves: rhbz#1636346 - Remove installkernel-bls script Related: rhbz#1647721 * Thu Oct 04 2018 Peter Jones - 2.02-62 - Exclude /etc/grub.d/01_fallback_counting until we work through some design questions. Resolves: rhbz#1614637 * Wed Oct 03 2018 Peter Jones - 2.02-61 - Fix the fallback counting script even harder. Apparently, this wasn't tested well enough. Resolves: rhbz#1614637 * Tue Oct 02 2018 Peter Jones - 2.02-60 - Fix grub.cfg boot counting snippet generation (lorbus) Resolves: rhbz#1614637 - Fix spurrious allocation error reporting on EFI boot Resolves: rhbz#1635319 - Stop doing TPM on BIOS *again*. It just doesn't work. Related: rhbz#1579835 - Make blscfg module loadable on older grub2 i386-pc and powerpc-ieee1275 builds - Fix execstack cropping up in grub2-tools - Ban stack trampolines with compiler flags. * Tue Sep 25 2018 Hans de Goede - 2.02-59 - Stop using pkexec for grub2-set-bootflag, it does not work under gdm instead make it suid root (it was written with this in mind) * Tue Sep 25 2018 Peter Jones - Use bounce buffers for addresses above 4GB - Allow initramfs, cmdline, and params >4GB, but not kernel * Wed Sep 12 2018 Peter Jones - 2.02-58 - Add 2 conditions to boot-success timer and service: - Don't run it for system users Resolves: rhbz#1592201 - Don't run it when pkexec isn't available Resolves: rhbz#1619445 - Use -Wsign-compare -Wconversion -Wextra in the build. * Tue Sep 11 2018 Peter Jones - 2.02-57 - Limit grub_malloc() on x86_64 to < 31bit addresses, as some devices seem to have a colossally broken storage controller (or UEFI driver) that can't do DMA to higher memory addresses, but fails silently. Resolves: rhbz#1626844 (possibly really resolving it this time.) - Also integrate Hans's attempt to fix the related error from -54, but do it the other way around: try the low addresses first and *then* the high one if the allocation fails. This way we'll get low regions by default, and if kernel/initramfs don't fit anywhere, it'll try the higher addresses. Related: rhbz#1624532 - Coalesce all the intermediate debugging junk from -54/-55/-56. * Tue Sep 11 2018 Peter Jones - 2.02-56 - Don't mangle fw_path even harder. Resolves: rhbz#1626844 - Fix reboot being missing on some platforms, and make it alias to "reset" as well. - More dprintf(). * Mon Sep 10 2018 Peter Jones - 2.02-55 - Fix UEFI memory problem in a different way. Related: rhbz#1624532 - Don't mangle fw_path with a / unless we're on http Resolves: rhbz#1626844 * Fri Sep 07 2018 Kevin Fenzi - 2.02-54 - Add patch from https://github.com/rhboot/grub2/pull/30 to fix uefi booting Resolves: rhbz#1624532 * Thu Aug 30 2018 Peter Jones - 2.02-53 - Fix AArch64 machines with no RAM latched lower than 1GB Resolves: rhbz#1615969 - Set http_path and http_url when HTTP booting - Hopefully slightly better error reporting in some cases - Better allocation of kernel+initramfs on x86_64 and aarch64 Resolves: rhbz#1572126 * Mon Aug 20 2018 Peter Jones - 2.02-52 - Update conflicts on grubby not to care about %%{?dist} * Sun Aug 19 2018 Peter Jones - 2.02-51 - Make it quieter. * Thu Aug 16 2018 Peter Jones - 2.02-50 - Fix arm32 off-by-one error on reading the PE header. * Tue Aug 14 2018 Peter Jones - 2.02-50 - Fix typo in /etc/grub.d/01_fallback_counting Resolves: rhbz#1614637 * Fri Aug 10 2018 Javier Martinez Canillas - 2.02-50 - Add an installkernel script for BLS configurations * Tue Aug 07 2018 Peter Jones - 2.02-49 - Temporarily make -cdboot perms 0700 again. * Fri Aug 03 2018 Peter Jones - 2.02-48 - Kill .note.gnu.property with fire. Resolves: rhbz#1612339 * Thu Aug 02 2018 Peter Jones - 2.02-47 - Enable armv7 EFI builds. This was way harder than I expected. * Tue Jul 17 2018 Peter Jones - 2.02-46 - Fix some minor BLS issues - Rework the FDT module linking to make aarch64 build and boot right * Mon Jul 16 2018 pjones - 2.02-45 - Rework SB patches and 10_linux.in changes even harder. Resolves: rhbz#1601578 * Mon Jul 16 2018 Hans de Goede - 2.02-44 - Make the user session automatically set the boot_success grubenv flag - Make offline-updates increment the boot_indeterminate grubenv variable * Mon Jul 16 2018 pjones - 2.02-43 - Rework SB patches and 10_linux.in changes * Fri Jul 13 2018 Peter Jones - 2.02-42 - Revert broken moduledir fix *again*. * Thu Jul 12 2018 Peter Jones - 2.02-41 - Fix our linuxefi/linux command reunion. * Wed Jul 11 2018 Peter Jones - 2.02-40 - Port several fixes from the F28 tree and a WIP tree. * Mon Jul 09 2018 pjones - 2.02-39 - Fix my fix of grub2-switch-to-blscfg (javierm and pjones) * Mon Jul 02 2018 Javier Martinez Canillas - 2.02-38 - Use BLS fragment filename as menu entry id and for sort criterion * Tue Jun 26 2018 Javier Martinez Canillas - Cleanups and fixes for grub2-switch-to-blscfg (pjones) - Use /boot/loader/entries as BLS dir also on EFI (javierm) * Tue Jun 19 2018 Peter Jones - 2.02-37 - Fix some TPM errors on 32-bit (hdegoede) - More fixups to avoid compiler changes (pjones) - Put lsmmap into the EFI builds (pjones) Related: rhbz#1572126 - Make 20-grub.install to exit if there is no machine ID set (javierm) Resolves: rhbz#1576573 - More fixes for BLS (javierm) Resolves: rhbz#1588184 * Wed May 16 2018 Peter Jones - 2.02-37.fc29 - Fixups to work with gcc 8 - Experimental https boot support on UEFI - XFS fixes for sparse inode support Resolves: rhbz#1575797 * Thu May 10 2018 Javier Martinez Canillas - 2.02-36 - Use version field to sort BLS entries if id field isn't defined - Add version field to BLS fragments generated by 20-grub.install * Tue Apr 24 2018 Peter Jones - 2.02-35 - A couple of fixes needed by Fedora Atomic - javierm * Mon Apr 23 2018 Peter Jones - 2.02-34 - Put the os-prober dep back in - we need to change test plans and criteria before it can go. Resolves: rhbz#1569411 * Wed Apr 11 2018 Peter Jones - 2.02-33 - Work around some issues with older automake found in CentOS. - Make multiple initramfs images work in BLS. * Wed Apr 11 2018 Javier Martinez Canillas - 2.02-32 - Make 20-grub.install to generate debug BLS when MAKEDEBUG is set. * Fri Apr 06 2018 Peter Jones - 2.02-31 - Pull in some TPM fixes I missed. * Fri Apr 06 2018 Peter Jones - 2.02-30 - Enable TPM measurements - Set the default boot entry to the first entry when we're using BLS. * Tue Apr 03 2018 Peter Jones - 2.02-29 - Fix for BLS paths on BIOS / non-UEFI (javierm) * Fri Mar 16 2018 Peter Jones - 2.02-28 - Install kernel-install scripts. (javierm) - Add grub2-switch-to-blscfg * Tue Mar 06 2018 Peter Jones - 2.02-27 - Build the blscfg module in on EFI builds. * Wed Feb 28 2018 Peter Jones - 2.02-26 - Try to fix things for new compiler madness. I really don't know why gcc decided __attribute__((packed)) on a "typedef struct" should imply __attribute__((align (1))) and that it should have a warning that it does so. The obvious behavior would be to keep the alignment of the first element unless it's used in another object or type that /also/ hask the packed attribute. Why should it change the default alignment at all? - Merge in the BLS patches Javier and I wrote. - Attempt to fix pmtimer initialization failures to not be super duper slow. * Fri Feb 09 2018 Igor Gnatenko - Escape macros in %%changelog * Tue Jan 23 2018 Peter Jones - 2.02-24 - Fix a merge error from 2.02-21 that affected kernel loading on Aarch64. Related: rhbz#1519311 Related: rhbz#1506704 Related: rhbz#1502312 * Fri Jan 19 2018 Peter Jones - 2.02-23 - Only nerf annobin, not -fstack-crash-protection. - Fix a conflict on /boot/efi directory permissions between -cdboot and the normal bootloader. * Thu Jan 18 2018 Peter Jones - 2.02-22 - Nerf some gcc 7.2.1-6 'features' that cause grub to crash on start. * Thu Jan 18 2018 Peter Jones - 2.02-21 - Fix grub2-efi-modules provides/obsoletes generation Resolves: rhbz#1506704 - *Also* build grub-efi-ia32{,-*,!-modules} packages for i686 builds Resolves: rhbz#1502312 - Make everything under /boot/efi be mode 0700, since that's what FAT will show anyway. * Wed Jan 17 2018 Peter Jones - 2.02-20 - Update to newer upstream for F28 - Pull in patches for Apollo Lake hardware Resolves: rhbz#1519311 * Tue Oct 24 2017 Peter Jones - 2.02-19 - Handle xen module loading (somewhat) better Resolves: rhbz#1486002 * Wed Sep 20 2017 Peter Jones - 2.02-18 - Make grub2-efi-aa64 provide grub2 Resolves: rhbz#1491045 * Mon Sep 11 2017 Dennis Gilmore - 2.02-17 - bump for Obsoletes again * Wed Sep 06 2017 Peter Jones - 2.02-16 - Fix Obsoletes on grub2-pc * Wed Aug 30 2017 Petr Šabata - 2.02-15 - Limit the pattern matching in do_alt_efi_install to files to unbreak module builds * Fri Aug 25 2017 Peter Jones - 2.02-14 - Revert the /usr/lib/.build-id/ change: https://fedoraproject.org/wiki/Changes/ParallelInstallableDebuginfo says (without any particularly convincing reasoning): The main build-id file should not be in the debuginfo file, but in the main package (this was always a problem since the package and debuginfo package installed might not match). If we want to make usr/lib/debug/ a network resource then we will need to move the symlink to another location (maybe /usr/lib/.build-id). So do it that way. Of course it doesn't matter, because exclude gets ignored due to implementation details. * Fri Aug 25 2017 Peter Jones - 2.02-13 - Add some unconditional Provides: grub2-efi on grub2-efi-${arch} grub2-efi-cdboot on grub2-efi-${arch}-cdboot grub2 on all grub2-${arch} pacakges - Something is somehow adding /usr/lib/.build-id/... to all the -tools subpackages, so exclude all that. * Thu Aug 24 2017 Peter Jones - 2.02-12 - Fix arm kernel command line allocation Resolves: rhbz#1484609 - Get rid of the temporary extra efi packages hack. * Wed Aug 23 2017 Peter Jones - 2.02-11 - Put grub2-mkimage in -tools, not -tools-extra. - Fix i686 building - Fix ppc HFS+ usage due to /boot/efi's presence. * Fri Aug 18 2017 Peter Jones - 2.02-10 - Add the .img files into grub2-pc-modules (and all legacy variants) * Wed Aug 16 2017 Peter Jones - 2.02-9 - Re-work for ia32-efi. * Wed Aug 16 2017 pjones - 2.02-8 - Rebased to newer upstream for fedora-27 * Tue Aug 15 2017 Peter Jones - 2.02-7 - Rebuild again with new fixed rpm. (bug #1480407) * Fri Aug 11 2017 Kevin Fenzi - 2.02-6 - Rebuild again with new fixed rpm. (bug #1480407) * Thu Aug 10 2017 Kevin Fenzi - 2.02-5 - Rebuild for rpm soname bump again. * Thu Aug 10 2017 Igor Gnatenko - 2.02-4 - Rebuilt for RPM soname bump * Thu Aug 03 2017 Peter Jones - 2.02-3 - Rebuild so it gets SB signed correctly. Related: rhbz#1335533 - Enable lsefi * Mon Jul 24 2017 Michael Cronenworth - 2.02-2 - Fix symlink to work on both EFI and BIOS machines Resolves: rhbz#1335533 * Mon Jul 10 2017 Peter Jones - 2.02-1 - Rebased to newer upstream for fedora-27 * Wed Feb 01 2017 Stephen Gallagher - 2.02-0.39 - Add missing %%license macro - Fix deps that should have moved to -tools but didn't. * Thu Dec 08 2016 Peter Jones - 2.02-0.38 - Fix regexp in power compile flags, and synchronize release number with other branches. * Fri Dec 02 2016 pjones - 1:2.02-0.37 - Rebased to newer upstream for fedora-26 * Thu Dec 01 2016 Peter Jones - 2.02-0.36 - Update version to .36 because I already built an f25 one named 0.35 * Thu Dec 01 2016 pjones - 1:2.02-0.35 - Rebased to newer upstream for fedora-26 * Thu Dec 01 2016 Peter Jones - 2.02-0.34 - Fix power6 makefile bits for newer autoconf defaults. - efi/chainloader: fix wrong sanity check in relocate_coff() (Laszlo Ersek) Resolves: rhbz#1347291 * Thu Aug 25 2016 Peter Jones - 2.02-0.34 - Update to be newer than f24's branch. - Add grub2-get-kernel-settings Related: rhbz#1226325 * Thu Apr 07 2016 pjones - 1:2.02-0.30 - Revert 27e66193, which was replaced by upstream's 49426e9fd Resolves: rhbz#1251600 * Thu Apr 07 2016 Peter Jones - 2.02-0.29 - Fix ppc64 build failure and rebase to newer f24 code. * Tue Apr 05 2016 pjones - 1:2.02-0.27 - Pull TPM updates from mjg59. Resolves: rhbz#1318067 * Tue Mar 08 2016 pjones - 1:2.02-0.27 - Fix aarch64 build problem. * Fri Mar 04 2016 Peter Jones - 2.02-0.26 - Rebased to newer upstream (grub-2.02-beta3) for fedora-24 * Thu Dec 10 2015 Peter Jones - 2.02-0.25 - Fix security issue when reading username and password Related: CVE-2015-8370 - Do a better job of handling GRUB2_PASSWORD Related: rhbz#1284370 * Fri Nov 20 2015 Peter Jones - 2.02-0.24 - Rebuild without multiboot* modules in the EFI image. Related: rhbz#1264103 * Sat Sep 05 2015 Kalev Lember - 2.02-0.23 - Rebuilt for librpm soname bump * Wed Aug 05 2015 Peter Jones - 2.02-0.21 - Back out one of the debuginfo generation patches; it doesn't work right on aarch64 yet. Resolves: rhbz#1250197 * Mon Aug 03 2015 Peter Jones - 2.02-0.20 - The previous fix was completely not right, so fix it a different way. Resolves: rhbz#1249668 * Fri Jul 31 2015 Peter Jones - 2.02-0.19 - Fix grub2-mkconfig's sort to put kernels in the right order. Related: rhbz#1124074 * Thu Jul 30 2015 Peter Jones - 2.02-0.18 - Fix a build failure on aarch64 * Wed Jul 22 2015 Peter Jones - 2.02-0.17 - Don't build hardened (fixes FTBFS) (pbrobinson) - Reconcile with the current upstream - Fixes for gcc 5 * Tue Apr 28 2015 Peter Jones - 2.02-0.16 - Make grub2-mkconfig produce the kernel titles we actually want. Resolves: rhbz#1215839 * Sat Feb 21 2015 Till Maas - Rebuilt for Fedora 23 Change https://fedoraproject.org/wiki/Changes/Harden_all_packages_with_position-independent_code * Mon Jan 05 2015 Peter Jones - 2.02-0.15 - Bump release to rebuild with Ralf Corsépius's fixes. * Sun Jan 04 2015 Ralf Corsépius - 2.02-0.14 - Move grub2.info/grub2-dev.info install-info scriptlets into *-tools package. - Use sub-shell in %%__debug_install_post (RHBZ#1168732). - Cleanup grub2-starfield-theme packaging. * Thu Dec 04 2014 Peter Jones - 2.02-0.13 - Update minilzo to 2.08 for CVE-2014-4607 Resolves: rhbz#1131793 * Thu Nov 13 2014 Peter Jones - 2.02-0.12 - Make backtrace and usb conditional on !arm - Make sure gcdaa64.efi is packaged. Resolves: rhbz#1163481 * Fri Nov 07 2014 Peter Jones - 2.02-0.11 - fix a copy-paste error in patch 0154. Resolves: rhbz#964828 * Mon Oct 27 2014 Peter Jones - 2.02-0.10 - Try to emit linux16/initrd16 and linuxefi/initrdefi when appropriate in 30_os-prober. Resolves: rhbz#1108296 - If $fw_path doesn't work to find the config file, try $prefix as well Resolves: rhbz#1148652 * Mon Sep 29 2014 Peter Jones - 2.02-0.9 - Clean up the build a bit to make it faster - Make grubenv work right on UEFI machines Related: rhbz#1119943 - Sort debug and rescue kernels later than normal ones Related: rhbz#1065360 - Allow "fallback" to include entries by title as well as number. Related: rhbz#1026084 - Fix a segfault on aarch64. - Load arm with SB enabled if available. - Add some serial port options to GRUB_MODULES. * Tue Aug 19 2014 Peter Jones - 2.02-0.8 - Add ppc64le support. Resolves: rhbz#1125540 * Thu Jul 24 2014 Peter Jones - 2.02-0.7 - Enabled syslinuxcfg module. * Wed Jul 02 2014 Peter Jones - 2.02-0.6 - Re-merge RHEL 7 changes and ARM works in progress. * Mon Jun 30 2014 Peter Jones - 2.02-0.5 - Avoid munging raw spaces when we're escaping command line arguments. Resolves: rhbz#923374 * Tue Jun 24 2014 Peter Jones - 2.02-0.4 - Update to latest upstream. * Thu Mar 13 2014 Peter Jones - 2.02-0.3 - Merge in RHEL 7 changes and ARM works in progress. * Mon Jan 06 2014 Peter Jones - 2.02-0.2 - Update to grub-2.02~beta2 * Sat Aug 10 2013 Peter Jones - 2.00-25 - Last build failed because of a hardware error on the builder. * Mon Aug 05 2013 Peter Jones - 2.00-24 - Fix compiler flags to deal with -fstack-protector-strong * Sat Aug 03 2013 Fedora Release Engineering - 1:2.00-24 - Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild * Tue Jul 02 2013 Dennis Gilmore - 2.00-23 - add epoch to obsoletes * Fri Jun 21 2013 Peter Jones - 2.00-22 - Fix linewrapping in edit menu. Resolves: rhbz #976643 * Thu Jun 20 2013 Peter Jones - 2.00-21 - Fix obsoletes to pull in -starfield-theme subpackage when it should. * Fri Jun 14 2013 Peter Jones - 2.00-20 - Put the theme entirely ento the subpackage where it belongs (#974667) * Wed Jun 12 2013 Peter Jones - 2.00-19 - Rebase to upstream snapshot. - Fix PPC build error (#967862) - Fix crash on net_bootp command (#960624) - Reset colors on ppc when appropriate (#908519) - Left align "Loading..." messages (#908492) - Fix probing of SAS disks on PPC (#953954) - Add support for UEFI OSes returned by os-prober - Disable "video" mode on PPC for now (#973205) - Make grub fit better into the boot sequence, visually (#966719) * Fri May 10 2013 Matthias Clasen - 2.00-18 - Move the starfield theme to a subpackage (#962004) - Don't allow SSE or MMX on UEFI builds (#949761) * Wed Apr 24 2013 Peter Jones - 2.00-17.pj0 - Rebase to upstream snapshot. * Thu Apr 04 2013 Peter Jones - 2.00-17 - Fix booting from drives with 4k sectors on UEFI. - Move bash completion to new location (#922997) - Include lvm support for /boot (#906203) * Thu Feb 14 2013 Peter Jones - 2.00-16 - Allow the user to disable submenu generation - (partially) support BLS-style configuration stanzas. * Tue Feb 12 2013 Peter Jones - 2.00-15.pj0 - Add various config file related changes. * Thu Dec 20 2012 Dennis Gilmore - 2.00-15 - bump nvr * Mon Dec 17 2012 Karsten Hopp 2.00-14 - add bootpath device to the device list (pfsmorigo, #886685) * Tue Nov 27 2012 Peter Jones - 2.00-13 - Add vlan tag support (pfsmorigo, #871563) - Follow symlinks during PReP installation in grub2-install (pfsmorigo, #874234) - Improve search paths for config files on network boot (pfsmorigo, #873406) * Tue Oct 23 2012 Peter Jones - 2.00-12 - Don't load modules when grub transitions to "normal" mode on UEFI. * Mon Oct 22 2012 Peter Jones - 2.00-11 - Rebuild with newer pesign so we'll get signed with the final signing keys. * Thu Oct 18 2012 Peter Jones - 2.00-10 - Various PPC fixes. - Fix crash fetching from http (gustavold, #860834) - Issue separate dns queries for ipv4 and ipv6 (gustavold, #860829) - Support IBM CAS reboot (pfsmorigo, #859223) - Include all modules in the core image on ppc (pfsmorigo, #866559) * Mon Oct 01 2012 Peter Jones - 1:2.00-9 - Work around bug with using "\x20" in linux command line. Related: rhbz#855849 * Thu Sep 20 2012 Peter Jones - 2.00-8 - Don't error on insmod on UEFI/SB, but also don't do any insmodding. - Increase device path size for ieee1275 Resolves: rhbz#857936 - Make network booting work on ieee1275 machines. Resolves: rhbz#857936 * Wed Sep 05 2012 Matthew Garrett - 2.00-7 - Add Apple partition map support for EFI * Thu Aug 23 2012 David Cantrell - 2.00-6 - Only require pesign on EFI architectures (#851215) * Tue Aug 14 2012 Peter Jones - 2.00-5 - Work around AHCI firmware bug in efidisk driver. - Move to newer pesign macros - Don't allow insmod if we're in secure-boot mode. * Wed Aug 08 2012 Peter Jones - Split module lists for UEFI boot vs UEFI cd images. - Add raid modules for UEFI image (related: #750794) - Include a prelink whitelist for binaries that need execstack (#839813) - Include fix efi memory map fix from upstream (#839363) * Wed Aug 08 2012 Peter Jones - 2.00-4 - Correct grub-mkimage invocation to use efidir RPM macro (jwb) - Sign with test keys on UEFI systems. - PPC - Handle device paths with commas correctly. Related: rhbz#828740 * Wed Jul 25 2012 Peter Jones - 2.00-3 - Add some more code to support Secure Boot, and temporarily disable some other bits that don't work well enough yet. Resolves: rhbz#836695 * Wed Jul 11 2012 Matthew Garrett - 2.00-2 - Set a prefix for the image - needed for installer work - Provide the font in the EFI directory for the same reason * Thu Jun 28 2012 Peter Jones - 2.00-1 - Rebase to grub-2.00 release. * Mon Jun 18 2012 Peter Jones - 2.0-0.37.beta6 - Fix double-free in grub-probe. * Wed Jun 06 2012 Peter Jones - 2.0-0.36.beta6 - Build with patch19 applied. * Wed Jun 06 2012 Peter Jones - 2.0-0.35.beta6 - More ppc fixes. * Wed Jun 06 2012 Peter Jones - 2.0-0.34.beta6 - Add IBM PPC fixes. * Mon Jun 04 2012 Peter Jones - 2.0-0.33.beta6 - Update to beta6. - Various fixes from mads. * Fri May 25 2012 Peter Jones - 2.0-0.32.beta5 - Revert builddep change for crt1.o; it breaks ppc build. * Fri May 25 2012 Peter Jones - 2.0-0.31.beta5 - Add fwsetup command (pjones) - More ppc fixes (IBM) * Tue May 22 2012 Peter Jones - 2.0-0.30.beta5 - Fix the /other/ grub2-tools require to include epoch. * Mon May 21 2012 Peter Jones - 2.0-0.29.beta5 - Get rid of efi_uga and efi_gop, favoring all_video instead. * Mon May 21 2012 Peter Jones - 2.0-0.28.beta5 - Name grub.efi something that's arch-appropriate (kiilerix, pjones) - use EFI/$SOMETHING_DISTRO_BASED/ not always EFI/redhat/grub2-efi/ . - move common stuff to -tools (kiilerix) - spec file cleanups (kiilerix) * Mon May 14 2012 Peter Jones - 2.0-0.27.beta5 - Fix module trampolining on ppc (benh) * Thu May 10 2012 Peter Jones - 2.0-0.27.beta5 - Fix license of theme (mizmo) Resolves: rhbz#820713 - Fix some PPC bootloader detection IBM problem Resolves: rhbz#820722 * Thu May 10 2012 Peter Jones - 2.0-0.26.beta5 - Update to beta5. - Update how efi building works (kiilerix) - Fix theme support to bring in fonts correctly (kiilerix, pjones) * Wed May 09 2012 Peter Jones - 2.0-0.25.beta4 - Include theme support (mizmo) - Include locale support (kiilerix) - Include html docs (kiilerix) * Thu Apr 26 2012 Peter Jones - 2.0-0.24 - Various fixes from Mads Kiilerich * Thu Apr 19 2012 Peter Jones - 2.0-0.23 - Update to 2.00~beta4 - Make fonts work so we can do graphics reasonably * Thu Mar 29 2012 David Aquilina - 2.0-0.22 - Fix ieee1275 platform define for ppc * Thu Mar 29 2012 Peter Jones - 2.0-0.21 - Remove ppc excludearch lines (dwa) - Update ppc terminfo patch (hamzy) * Wed Mar 28 2012 Peter Jones - 2.0-0.20 - Fix ppc64 vs ppc exclude according to what dwa tells me they need - Fix version number to better match policy. * Tue Mar 27 2012 Dan Horák - 1.99-19.2 - Add support for serial terminal consoles on PPC by Mark Hamzy * Sun Mar 25 2012 Dan Horák - 1.99-19.1 - Use Fix-tests-of-zeroed-partition patch by Mark Hamzy * Thu Mar 15 2012 Peter Jones - 1.99-19 - Use --with-grubdir= on configure to make it behave like -17 did. * Wed Mar 14 2012 Peter Jones - 1.99-18 - Rebase from 1.99 to 2.00~beta2 * Wed Mar 07 2012 Peter Jones - 1.99-17 - Update for newer autotools and gcc 4.7.0 Related: rhbz#782144 - Add /etc/sysconfig/grub link to /etc/default/grub Resolves: rhbz#800152 - ExcludeArch s390*, which is not supported by this package. Resolves: rhbz#758333 * Fri Feb 17 2012 Orion Poplawski - 1:1.99-16 - Build with -Os (bug 782144) * Fri Jan 13 2012 Fedora Release Engineering - 1:1.99-15 - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild * Wed Dec 14 2011 Matthew Garrett - 1.99-14 - fix up various grub2-efi issues * Thu Dec 08 2011 Adam Williamson - 1.99-13 - fix hardwired call to grub-probe in 30_os-prober (rhbz#737203) * Mon Nov 07 2011 Peter Jones - 1.99-12 - Lots of .spec fixes from Mads Kiilerich: Remove comment about update-grub - it isn't run in any scriptlets patch info pages so they can be installed and removed correctly when renamed fix references to grub/grub2 renames in info pages (#743964) update README.Fedora (#734090) fix comments for the hack for upgrading from grub2 < 1.99-4 fix sed syntax error preventing use of $RPM_OPT_FLAGS (#704820) make /etc/grub2*.cfg %%config(noreplace) make grub.cfg %%ghost - an empty file is of no use anyway create /etc/default/grub more like anaconda would create it (#678453) don't create rescue entries by default - grubby will not maintain them anyway set GRUB_SAVEDEFAULT=true so saved defaults works (rbhz#732058) grub2-efi should have its own bash completion don't set gfxpayload in efi mode - backport upstream r3402 - Handle dmraid better. Resolves: rhbz#742226 * Wed Oct 26 2011 Fedora Release Engineering - 1:1.99-11 - Rebuilt for glibc bug#747377 * Wed Oct 19 2011 Adam Williamson - 1.99-10 - /etc/default/grub is explicitly intended for user customization, so mark it as config(noreplace) * Tue Oct 11 2011 Peter Jones - 1.99-9 - grub has an epoch, so we need that expressed in the obsolete as well. Today isn't my day. * Tue Oct 11 2011 Peter Jones - 1.99-8 - Fix my bad obsoletes syntax. * Thu Oct 06 2011 Peter Jones - 1.99-7 - Obsolete grub Resolves: rhbz#743381 * Wed Sep 14 2011 Peter Jones - 1.99-6 - Use mv not cp to try to avoid moving disk blocks around for -5 fix Related: rhbz#735259 - handle initramfs on xen better (patch from Marko Ristola) Resolves: rhbz#728775 * Sat Sep 03 2011 Kalev Lember - 1.99-5 - Fix upgrades from grub2 < 1.99-4 (#735259) * Fri Sep 02 2011 Peter Jones - 1.99-4 - Don't do sysadminny things in %%preun or %%post ever. (#735259) - Actually include the changelog in this build (sorry about -3) * Thu Sep 01 2011 Peter Jones - 1.99-2 - Require os-prober (#678456) (patch from Elad Alfassa) - Require which (#734959) (patch from Elad Alfassa) * Thu Sep 01 2011 Peter Jones - 1.99-1 - Update to grub-1.99 final. - Fix crt1.o require on x86-64 (fix from Mads Kiilerich) - Various CFLAGS fixes (from Mads Kiilerich) - -fexceptions and -m64 - Temporarily ignore translations (from Mads Kiilerich) * Thu Jul 21 2011 Peter Jones - 1.99-0.3 - Use /sbin not /usr/sbin . * Thu Jun 23 2011 Peter Lemenkov - 1:1.99-0.2 - Fixes for ppc and ppc64 * Wed Feb 09 2011 Fedora Release Engineering - 1:1.98-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild