lorax has its own code for building EFI images, and it needs the
font file to do that successfully, so let's make sure it's there
for lorax to find. This doesn't revert the embedding change,
it just reverts the part where we don't bother to install the
font to /boot/grub2/fonts any more.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's no point to this (the packaging isn't generic, confusion between
grub and grub2 in places, it's not fewer characters to type, have to
think about escaping in macros, ...) and it makes searching for things
needlessly difficult.
This finishes the revert of 967c5629ed
("Don't harcode grub2 in the spec file") that was begun in
af038a0bdc ("Revert "Don't harcode grub2
in the spec file"").
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Two issues:
- line 538 switches the filename from "grub" to "grub2" where it
shouldn't
- in general, things that aren't referring to the packaging itself
shouldn't be %{name}; it just makes them less flexible.
This reverts commit 967c5629ed.
The annobin GCC plugin is now turned on linking for LTO mode but it causes
build failures on at least powerpc. The plugin is already removed from the
CFLAGS but was added again through LDFLAGS, remove from there as well.
Signed-off-by: Peter Jones <pjones@redhat.com>
There's a variable for this, use it consistently.
Suggested-by: Benjamin Herrenschmidt <benh@amazon.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
GRUB is now using /boot/grub2 as the directory where all the resources are
loaded, but the unicode.pf2 is still installed in the EFI System Partition.
Resolves: rhbz#1739762
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The GRUB configuration files layout on EFI platforms isn't consistent with
other non-EFI platforms (e.g: legacy BIOS x86 and Open Firmware ppc64le).
On platforms using EFI, the GRUB config file (grub.cfg) and environment
variables block (grubenv) are stored in the EFI System Partition (ESP),
while for non-EFI platforms these are stored in the boot partition (or
/boot directory if not boot partition is used).
The reason for this is that the path where the GRUB bootloader searches
for its configuration file varies depending on the firmware interface.
For EFI the GRUB binary is located in the ESP and it expects to find its
config file in that location as well. But this creates the mentioned
inconsistency, because the GRUB configuration file has to be stored in
/boot/efi/EFI/fedora/grub.cfg while for non-EFI platforms it has to be
stored in /boot/grub2/grub.cfg.
To allow all platforms to have the GRUB config file in the same location,
only a minimal config file could be stored in the ESP and this will load
the one that is stored in /boot/grub2.
Related: rhbz#1918817
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
GRUB uses -march=i386 to build the x86 BIOS code but recent changes in the
default %{optflags} enabled the -fcf-protection flag that's not compatible
with pre-i686 CPUs.
This led to a build error in the grub2 package. To avoid this failure and
let the package to build again, remove the -fcf-protection flag for now.
Related: rhbz#1915452
Signed-off-by: Jeff Law <law@redhat.com>
Users can unintentionally remove the grub2 packages and break their system
by deleting the bootloader. To prevent this mark them as protected by DNF.
Resolves: rhbz#1874541
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The /boot/grub2/grubenv file is not installed by the grub2 packages but
is either a symbolic link created on %install or a regular file created
by Anaconda during installation.
This is causing the tps-rpmtest to fail in some architectures since the
file attributes don't match what's expected by the package. Because is
a special file, make verification to ignore the size, mode, checksum
and mtime attributes.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The Default Boot Behavior for EFI if no BootOrder and Boot#### variables
are found is to look for an ESP and start \EFI\BOOT\BOOT{$arch}.efi.
This is usually fallback.efi installed by the shim package, but since shim
isn't used on armv7, there's no \EFI\BOOT\BOOTARM.EFI installed in the ESP.
So install GRUB as \EFI\BOOT\BOOTARM.EFI for armv7 so there is a default
EFI binary to be started.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Since GRUB 2.04 there is support for TPM measurements in a tpm module that
uses the verifiers framework. So this is used now instead of the previous
downstream patches that we were carrying.
But we forgot to enable this module when rebasing to 2.04 which leads to
GRUB no longer measuring the kernel, initrd and command line parameters.
One side effect of using the verifiers framework is that if measurements
fail, GRUB won't be able to open the files since the errors from the tpm
module are propagated. This means that a firmware with a buggy tpm support
will prevent the machine to boot, which was not the case with the previous
downstream patches. Don't propagate the measurement errors to prevent this.
Resolves: rhbz#1836433
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
cmurf and javierm noticed[0] that we don't have zstd enabled, and that could
cause issues in some cases for /boot on btrfs subvolumes. This adds it to our
module list.
[0] https://github.com/rhinstaller/anaconda/pull/2255#discussion_r359123085
Related: rhbz#1418336
Signed-off-by: Peter Jones <pjones@redhat.com>
This gets rid of the vestigial remnants of the now-obsolete
release-to-master.patch , and moves gnulib to be earlier in our source list.
Signed-off-by: Peter Jones <pjones@redhat.com>
- drop deprecated groups from the macros file, already gone from main spec.
- don't ship arch specific bits in tools-extra that are already special cased in tools
- move grub2-glue-efi to tools-efi, it's Mac specific and there's othe Mac efi tools there
- drop tools-extra dep for efi binaries, all in tools-efi and anaconda deals with that
- put grub2-install man page in the right package with the util
- other minor cleanups
This change updates grub to the 2.04 release. The new release changed how
grub is built, so the bootstrap and bootstrap.conf files have to be added
to the dist-git. Also, the gitignore file changed so it has to be updated.
Since the patches have been forward ported to 2.04, there's no need for a
logic to maintain a patch with the delta between the release and the grub
master branch. So the release-to-master.patch is dropped and no longer is
updated by the do-rebase script.
Also since gnulib isn't part of the grub repository anymore and cloned by
the boostrap tool, a gnulib tarball is included as other source file and
copied before calling the bootstrap tool. That way grub can be built even
in builders that only have access to the sources lookaside cache.
Resolves: rhbz#1727279
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The rpm-build's "debugedit" program will silently corrupt .debug_macro
strings when a binary is compiled with -g3. Later in the build phase,
gdb-add-index is invoked to extract the DWARF index from the binary,
and GDB will segfault because dwarf2read.c:parse_definition_macro's
'body' variable is NULL.
Resolves: rhbz#1708780
rpmdiff noticed the following:
Detecting usr/sbin/grub2-ofpathname with not-hardened warnings '
Hardened: grub2-ofpathname: FAIL: Gaps were detected in the annobin coverage. Run with -v to list.
Hardened: grub2-ofpathname: FAIL: Not linked with -Wl,-z,now.
Hardened: grub2-ofpathname: MAYB: The PIC/PIE setting was not recorded.
Hardened: grub2-ofpathname: FAIL: Not linked as a position independent executable (ie need to add '-pie' to link command line).
' on ppc64le
This is because while we made the CFLAGS get some new options, LDFLAGS never
got the same treatement, and we disabled %{_hardened_build} to avoid getting
its options in the TARGET_{C,LD}FLAGS variables.
This patch duplicates the infrastructure for {HOST,TARGET}_CFLAGS into
{HOST,TARGET}_LDFLAGS, and adds the %{_hardening_ldflags} and
%{_hardening_cflags} to both HOST_{C,LD}FLAGS.
Additionally, it fixes the CPPFLAGS definitions, since rpm doesn't define any
CPPFLAGS at all, and makes the -I$(pwd) be there exclusively, not on CFLAGS as
well, since they're always used in concert.
Signed-off-by: Peter Jones <pjones@redhat.com>
os-prober 1.75 dropped all the code for handling device mapper
directly in favor of only supporting the use of grub2-mount.
Thus, we now need grub2-mount to be built and packaged so that
os-prober can depend on it. We ship it in the grub2-tools-minimal
package to avoid creating a dependency loop between grub2-tools and
os-prober.
Resolves: rhbz#1471267
Signed-off-by: Neal Gompa <ngompa13@gmail.com>
GRUB has an user-space program emulator that allows to parse config files
and execute boot entries using the kexec tool. Add a grub2-emu subpackage
to install the emulator.
The subpackage is disabled on ppc64le architecture for now since grub2-emu
fails to build there.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
