Add kernel-install scripts

Install a 20-grubby.install and 90-loaderentry.install kernel-install
scripts in /etc/kernel/install.d so these have higher precedence than
the ones installed in /usr/lib/kernel/install.d by the systemd pkg.

If GRUB 2 pkg isn't installed, then the systemd scripts are executed
on kernel installation and removal.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>

20-grub.install

@@ -0,0 +1,99 @@
+#!/bin/bash
+
+[[ -f /etc/default/grub ]] && . /etc/default/grub
+[[ -f /etc/os-release ]] && . /etc/os-release
+
+COMMAND="$1"
+KERNEL_VERSION="$2"
+BOOT_DIR_ABS="$3"
+KERNEL_IMAGE="$4"
+
+KERNEL_DIR="${KERNEL_IMAGE%/*}"
+
+MACHINE_ID=$KERNEL_INSTALL_MACHINE_ID
+
+# Remove it, since for grub2 the images are always installed in /boot
+rm -rf "${BOOT_DIR_ABS%/*}"
+
+BLS_DIR="/boot/loader/entries"
+if [ -d /sys/firmware/efi ]; then
+    BLS_DIR="/boot/efi/EFI/${ID}/loader/entries"
+fi
+
+[[ "$KERNEL_VERSION" == *\+* ]] && flavor=-"${KERNEL_VERSION##*+}"
+case "$COMMAND" in
+    add)
+        if [[ "${KERNEL_DIR}" != "/boot" ]]; then
+            for i in \
+                "$KERNEL_IMAGE" \
+                    "$KERNEL_DIR"/System.map \
+                    "$KERNEL_DIR"/config \
+                    "$KERNEL_DIR"/zImage.stub \
+                    "$KERNEL_DIR"/dtb \
+                ; do
+                [[ -e "$i" ]] || continue
+                cp -aT "$i" "/boot/${i##*/}-${KERNEL_VERSION}"
+                command -v restorecon &>/dev/null && \
+                    restorecon -R "/boot/${i##*/}-${KERNEL_VERSION}"
+            done
+            # hmac is .vmlinuz-<version>.hmac so needs a special treatment
+            i="$KERNEL_DIR/.${KERNEL_IMAGE##*/}.hmac"
+            if [[ -e "$i" ]]; then
+                cp -a "$i" "/boot/.${KERNEL_IMAGE##*/}-${KERNEL_VERSION}.hmac"
+                command -v restorecon &>/dev/null && \
+                    restorecon "/boot/.${KERNEL_IMAGE##*/}-${KERNEL_VERSION}.hmac"
+            fi
+        fi
+
+	if [[ "x${GRUB_ENABLE_BLSCFG}" = "xtrue" ]] || [[ ! -f /sbin/new-kernel-pkg ]]; then
+            [[ -d "$BLS_DIR" ]] || mkdir -p "$BLS_DIR"
+	    if [[ ! -f "${KERNEL_DIR}/bls.conf" ]]; then
+
+		if [ "${flavor}" = "-debug" ]; then
+		    debugname=" with debugging"
+		else
+		    debugname=""
+		fi
+
+		cat >"${KERNEL_DIR}/bls.conf" <<EOF
+title ${NAME} (${KERNEL_VERSION}) ${VERSION}${debugname}
+linux /vmlinuz-${KERNEL_VERSION}
+initrd /initramfs-${KERNEL_VERSION}.img
+options \$kernelopts
+id ${ID}-0-${KERNEL_VERSION}
+grub_users \$grub_users
+grub_arg --unrestricted
+grub_class kernel${flavor}
+EOF
+	    fi
+	    cp -aT "${KERNEL_DIR}/bls.conf" "${BLS_DIR}/${MACHINE_ID}-${KERNEL_VERSION}.conf" || exit $?
+	    exit 0
+        fi
+
+        /sbin/new-kernel-pkg --package "kernel${flavor}" --install "$KERNEL_VERSION" || exit $?
+        /sbin/new-kernel-pkg --package "kernel${flavor}" --mkinitrd --dracut --depmod --update "$KERNEL_VERSION" || exit $?
+        /sbin/new-kernel-pkg --package "kernel${flavor}" --rpmposttrans "$KERNEL_VERSION" || exit $?
+	# If grubby is used there's no need to run other installation plugins
+	exit 77
+        ;;
+    remove)
+
+	if [[ "x${GRUB_ENABLE_BLSCFG}" = "xtrue" ]] || [[ ! -f /sbin/new-kernel-pkg ]]; then
+            rm -f "${BLS_DIR}/${MACHINE_ID}-${KERNEL_VERSION}.conf"
+
+            for i in vmlinuz System.map config zImage.stub dtb; do
+                rm -rf "/boot/${i}-${KERNEL_VERSION}"
+            done
+            # hmac is .vmlinuz-<version>.hmac so needs a special treatment
+            rm -f "/boot/.vmlinuz-${KERNEL_VERSION}.hmac"
+
+            exit 0
+        fi
+
+        /sbin/new-kernel-pkg --package "kernel${flavor+-$flavor}" --rminitrd --rmmoddep --remove "$KERNEL_VERSION" || exit $?
+        # If grubby is used there's no need to run other installation plugins
+        exit 77
+        ;;
+    *)
+        ;;
+esac

grub2.spec

@@ -7,7 +7,7 @@
 Name:		grub2
 Epoch:		1
 Version:	2.02
-Release:	27%{?dist}
+Release:	28%{?dist}
 Summary:	Bootloader with support for Linux, Multiboot and more
 Group:		System Environment/Base
 License:	GPLv3+
@@ -21,6 +21,7 @@ Source4:	http://unifoundry.com/unifont-5.1.20080820.pcf.gz
 Source5:	theme.tar.bz2
 Source6:	gitignore
 Source8:	strtoull_test.c
+Source9:	20-grub.install
 
 %include %{SOURCE1}
 
@@ -211,6 +212,11 @@ cat << EOF > ${RPM_BUILD_ROOT}%{_sysconfdir}/prelink.conf.d/grub2.conf
 -b /usr/sbin/grub2-sparc64-setup
 EOF
 
+# Install kernel-install scripts
+install -Dm0755 -t %{buildroot}%{_prefix}/lib/kernel/install.d/ %{SOURCE9}
+ln -sf /dev/null %{buildroot}%{_sysconfdir}/kernel/install.d/20-grubby.install
+ln -sf /dev/null %{buildroot}%{_sysconfdir}/kernel/install.d/90-loaderentry.install
+
 # Don't run debuginfo on all the grub modules and whatnot; it just
 # rejects them, complains, and slows down extraction.
 %global finddebugroot "%{_builddir}/%{?buildsubdir}/debug"
@@ -303,6 +309,9 @@ fi
 %dir %{_datarootdir}/grub/themes/
 %exclude %{_datarootdir}/grub/themes/*
 %attr(0700,root,root) %dir %{_sysconfdir}/grub.d
+%{_prefix}/lib/kernel/install.d/20-grub.install
+%{_sysconfdir}/kernel/install.d/20-grubby.install
+%{_sysconfdir}/kernel/install.d/90-loaderentry.install
 %dir %{_datarootdir}/grub
 %exclude %{_datarootdir}/grub/*
 %dir /boot/%{name}
@@ -451,6 +460,9 @@ fi
 %endif
 
 %changelog
+* Fri Mar 09 2018 Javier Martinez Canillas <javierm@redhat.com> - 2.02-28
+- Install kernel-install scripts.
+
 * Tue Mar 06 2018 Peter Jones <pjones@redhat.com> - 2.02-27
 - Build the blscfg module in on EFI builds.