= Using the GRUB2 boot prompt
[[using-the-grub-2-boot-prompt]]

If improperly configured, *GRUB2* may fail to load and subsequently drop
to a boot prompt. To boot into the system, proceed as follows:

. Load the XFS and LVM modules
+
----
insmod xfs
insmod lvm
----

. List the drives which *GRUB2* sees:
+
----
grub2> ls
----

. Study the output for the partition table of the `/dev/sda` device. It may look similar to the following example on a dos partition table with three partitons.
will look something like this:
+
----
(hd0) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1)
----
+
or similar to this output on a gpt partition table of the `/dev/sda` device with four
partitions.
+
----
(hd0) (hd0,gpt4) (hd0,gpt3)  (hd0,gpt2) (hd0,gpt1)
----

. Probe each partition of the drive and locate your `vmlinuz` and `initramfs` files.
+
----
ls (hd0,1)/ 
----
+
The outcome of the previous command will list the files on `/dev/sda1`. If this partition contains the `/boot` directory, it will show the full name of `vmlinuz` and `initramfs`.

. Set the root partition.
+
----
grub> set root=(hd0,3)
----

. Set the desired kernel.
+
----
grub> linux (hd0,1)/vmlinuz-3.0.0-1.fc16.i686 root=/dev/sda3 rhgb quiet selinux=0 
# NOTE : add other kernel args if you need them
# NOTE : change the numbers to match your system
----

. Set the desired `initrd`.
+
----
grub> initrd (hd0,1)/initramfs-3.0.0-1.fc16.i686.img
# NOTE : change the numbers to match your system
----

. Boot with the selected settings.
+
----
grub> boot
----

. To restore the bootloader's functionality, regenerate the *GRUB2* configuration file and reinstall the bootloader into the MBR, as described in xref:adding-other-operating-systems-grub2[Adding other operating systems to the *GRUB2* menu].
